Can be used as either a fully stand-alone device, or connected to a PC, the LTT-186 is equipped with a Shock resistant 40 Gb Hard drive, allowing it to be used in the most rugged mobile environments (Shock Resistance of 200G [half sine, 2mS].

The LTT-186 is derived from the proven architecture of the LTT-184, but additionally is equipped with a 40Gb Hard drive internally.
The connection to a PC is achieved using a self installing SCSI-II port. The LTT-186 does not need any driver and is immediately ready for operation. The internal hard drive is recognized under Win98, WinNT4.0, Win2000 and WinXP as a hard drive and therefore is directly reachable using all programs.

Software configurable Input Amplifiers, and internal Auto-Calibration, give the LTT reliability, and ease of use.

The housing was chosen to suit demanding mobile use: a very robust metal housing with a reinforced aluminium second floor that protects the internal 2.5”, 40 GB high performance hard drive. The front panel shows all the important information quickly and allows for PC independent operation.

The setup of the Stand-Alone-Operation is accomplished with the standard Online-PC-Software LTTview. This allows the hardware to be configured, the recording mode and the sampling Frequency (internal or external clock). Up to 16 configurations of the Stand-Alone-Operation can be saved internally allowing PC-independent measurement setups.

For maximum flexibilty the LTT-186 is delivered with a 9-36VDC / 100-240VAC Power Supply.